Animal Surgical Equipment Accessories
Injectors to manually access the ports in Instech VAH95AB Vascular Access Harnesses, VAB95BS buttons and SIP22/4 injection ports. Needlefree. 10 sterile pouches of 5. Replaces older SN22 needles.
The Instech VAH6M-50 injector provides needle-free, protected access to rat Vascular Access Harness™ ports for flushing, dosing, or sampling. Its recessed tip interfaces safely with the VAH septum while preventing needle-stick risk. Compatible with rat VAH and VAB95 systems, it supports quick manual access during infusion or blood-collection workflows. Supplied as 50 sterile pouches of 5 for high-throughput studies.
Features
- Injector for rat VAH™ and VAB95 systems
- Recessed, needle-free protected tip
- For manual flush, dose, or sampling
- 50 sterile pouches of 5
- Compatible with 3Fr rat catheter setups
- EtO sterilized
Med Vet International Cortical Self-Tapping Screw, J0419NS, 2.7mm x 32mm, Each
Use with 2.7mm compression and 2.7mm reconstruction plates to obtain compression at a fracture site. Self-tapping threads sold in single packs.Self-Tapping screws save time and work extremely well in most circumstances especally in the proximal tibia for TPLO and TTO.Screw. Self-tapping threads. 32mm L. Stainless Steel.
Med Vet International Headless Lag Screws - 2.7mm X 20mm, J1334E, Each
Headless Lag Screws - 2.7mm X 20mm, J1334E, Each
Med Vet International Endotracheal Tube Adapter 10.0mm, J0157K
Portex Endotracheal Adaptor The full range of small animal endotracheal tubes is covered by the twelve adaptors. The adaptors may be sterilized by conventional methods. The compact Swivel Connector may be rotated a full 360 degrees affording maximum positioning and flexibility. For use on all endotracheal tubes.
Med Vet International LeiLox TPLO Screws, 2.4mm, Locking - 22mm, J1552ASA9, Each
LeiLox TPLO Screws, 2.4mm, Locking - 22mm
Instech Luer stub, 17ga (white) x 0.5in (12mm), non-sterile, pack of 1000
The Instech LS17K is a non-sterile bulk package of luer stubs (blunt needles) used as tubing connectors. These female luer stubs are designed to connect infusion tubing or catheters to syringes or other male luer connectors during experimental procedures.
Features
- Component Type: Female luer stub / Blunt needle connector
- Gauge: 17ga
- Tip Length: 0.5 in (12 mm)
- Tip Design: Deburred to prevent damage to tubing
- Hub Color: White
- Material: Polypropylene hub with stainless steel tip
- Sterility: Non-sterile
- Quantity: Package of 1000
- Application: Connecting catheters to syringes or external infusion tubing
Med Vet International Mare catheter, 60 cm, J0090SM, Each
Mare Urinary Catheter. Flexible plastic. Similar to JOR90s, only shorter. 8.6 x 60cm L.
Med Vet International Locking screws 3.5mm x 34mm, J0438LN, each
Locking screws 3.5mm (uses 2.7 mm pilot drill bit)
Bioanalytical Systems Inc EMPIS 2 INFUSION-2 SYR-4/ST
Set, Infusion; BASi; For BAS-2 Empis; 2-Syringe; 4 sets/box *Does not ship to Puerto Rico
Med Vet International Jorvet Nylon Feline Restraint Bags, Medium Size, J0170
The Jorvet feline restraint bags are made of a washable and waterproof nylon material and are designed for proper restraint of a fractious cat. They have a 2-way zipper running full length over the back for front or rear access. This cat restraint bag is equipped with a quick close velcro collar and front leg openings. The pull-tab zipper flaps provide a quick fur-free closure.
Med Vet International Jorvet Soft E-Collar, XX-Small, J1003A
The Jorvet XX-Small soft e-collar was designed for the comfort of the patient and is still effective in offering licking and chewing protection for animals. This elizabethan type collar allows pets to move about freely without damaging furniture, and they are able to eat and drink more freely. The soft E-Collar is made of a heavy nylon materials that is waterproof and held in place by a strong flat tie.
Tube sets for Instech P720 peristaltic pumps, .093in ID silicone with .062in ID barb inlet and outlet (mates with 062 tubing). Package of 5, nonsterile.
The Instech P720/TS‑BS062SBS is a barb‑to‑barb tube set for P720 peristaltic pumps, made with .062in ID silicone tubing and .062in ID barb connectors for secure integration with standard laboratory tubing. Supplied non‑sterile in packs of five, these tube sets provide smooth, reliable fluid delivery for higher low‑flow infusion and perfusion applications.
Features
- .062in ID silicone tubing for higher low‑flow performance
- .062in ID barb inlet and outlet connectors
- Non‑sterile tube sets supplied in packs of five
- Compatible with all P720 peristaltic pump models
- Suitable for infusion, perfusion, and general research fluid transfer
Med Vet International Locking Screw 2.4mm x 14mm Star/Torx, J1220TD, Each
Locking Screw 2.4mm x 14mm Star/Torx, J1220TD, Each
Instech Co-extruded PE/PVC external infusion tubing. Polyethylene flow path for biocompatibility; PVC outside to minimize kinking. .017x.051in; fits 25ga. Clear. 30m (98ft) spool. Non sterile.
The Instech BTCOEX‑25 is a co‑extruded PE/PVC external infusion tubing featuring a polyethylene inner layer for excellent compound compatibility and a PVC outer layer to minimize kinking and evaporation. Sized at .017x.051in (0.4x1.3mm) to fit 25ga connectors, this clear tubing provides a reliable friction‑fit interface for external infusion lines. It is supplied non‑sterile on a 30m (98ft) spool for use in laboratory research applications.
Features
- Co‑extruded PE/PVC external infusion tubing
- PE inner layer for biocompatible flow path
- PVC outer layer for kink resistance
- .017x.051in (0.4x1.3mm) dimensions; fits 25ga
- Clear tubing on a 30m (98ft) non‑sterile spool
- Designed for external infusion use only